Search Constraints
You searched for:
Topic
prototypes (object genre)
Remove constraint Topic: prototypes (object genre)
« Previous |
1 - 10 of 13
|
Next »
Number of results to display per page
Search Results
- Description:
- This Stool, in the collection of the Grand Rapids Art Museum, is constructed with a pronged aluminum pedestal base with three extended feet. The base supports a padded seat which is upholstered with leather. This is stool is the prototype for those made for the LaFonda del Sol restaurant in New York City. Herman Miller Trade Name: prototype
- Date Issued:
- [1945 TO 1960]
- Data Provider:
- Wayne State University. Libraries and Grand Rapids Art Museum
- Collection:
- Herman Miller Consortium Collection
- Description:
- These Drawers with Frame, in the collection of the Public Museum of Grand Rapids, consists of a wooden frame and two drawers. Co-Struc is a system of containers, frames, carts, and rails. They are lightweight, washable, sanitizable, self-extinguishing, self-stacking, and self-hanging and can be used in hospitals, laboratories and other health care facilities where these features are desirable. The system was developed by the Herman Miller Research Corporation, in Ann Arbor, Michigan. The parts are modular and inter-changeable, configured without the use of special tools. Materials include injection molded polyphenyline oxide, compression molded sheet molding compound, extruded polyvinyl chloride, sheet steel with baked enamel finish, injection molded polypropelene, vacuum formed polyallomer, injection molded polycarbonate, steel, and cast aluminum. These drawers were part of a prototype used in the Theda Clark test. Herman Miller Series: Co-Struc
- Date Issued:
- 1962-01-01T00:00:00Z
- Data Provider:
- Wayne State University. Libraries and Grand Rapids Public Museum
- Collection:
- Herman Miller Consortium Collection
- Description:
- This Cart, in the collection of the Public Museum of Grand Rapids, consists of a wooden cart painted grey with four casters. Tag attached reads: "L cart mock-up shows method allowing two-part mold manufacturing. " Co-Struc is a system of containers, frames, carts, and rails; lightweight, washable, sanitizable, self-extinguishing, self-stacking, self-hanging for use in hospitals, laboratories and other health care facilities where these features are desirable. The system was developed by the Herman Miller Research Corporation, in Ann Arbor, Michigan. The parts are modular and inter-changeable, configured without the use of special tools. Materials include injection molded polyphenyline oxide, compression molded sheet molding compound, extruded polyvinyl chloride, sheet steel with baked enamel finish, injection molded polypropelene, vacuum formed polyallomer, injection molded polycarbonate, steel, and cast aluminum. Herman Miller Trade Name: Prototype For L-Cart Herman Miller Series: Co-Struc Product Number: CO 212-01
- Date Issued:
- 1963-01-01T00:00:00Z
- Data Provider:
- Wayne State University. Libraries and Grand Rapids Public Museum
- Collection:
- Herman Miller Consortium Collection
- Description:
- This Drawer Frame, in the collection of the Public Museum of Grand Rapids, is a prototype which consists of two molded plastic pieces, two wooden pieces, and one vinyl coated metal piece. Co-Struc is a system of containers, frames, carts, and rails. They are lightweight, washable, sanitizable, self-extinguishing, self-stacking, and self-hanging and can be used in hospitals, laboratories and other health care facilities where these features are desirable. The system was developed by the Herman Miller Research Corporation, in Ann Arbor, Michigan. The parts are modular and inter-changeable, configured without the use of special tools. Materials include injection molded polyphenyline oxide, compression molded sheet molding compound, extruded polyvinyl chloride, sheet steel with baked enamel finish, injection molded polypropelene, vacuum formed polyallomer, injection molded polycarbonate, steel, and cast aluminum. Herman Miller Series: Co-Struc Frames
- Date Issued:
- 1975-01-01T00:00:00Z
- Data Provider:
- Wayne State University. Libraries and Grand Rapids Public Museum
- Collection:
- Herman Miller Consortium Collection
- Description:
- This Modular Desk, in the collection of The Henry Ford, consists of a white laminate work surface and base of two square 'C' Shaped metal legs painted gray with metal glides and footrest bar. The back, side panels, and two pencil drawer fronts are walnut veneer. The lift cover is walnut veneer with cork board interior. there is also a padded gray vinyl elbow rest and the edging is a dark gray vinyl. This piece is a Freestanding desk prototype designed by Propst, Robert, commonly referred to as "First Prototype -- Freestanding AO Desk". Herman Miller Trade Name: Freestanding Desk ~ Prototype
- Date Issued:
- 1963-01-01T00:00:00Z
- Data Provider:
- Wayne State University. Libraries and Henry Ford (Organization)
- Collection:
- Herman Miller Consortium Collection
- Description:
- This Casting, in the collection of the Oakland Museum of California, is a sofa casting made of metal and painted silver. This sofa casting is the first casting for a Soft Pad Sofa. Herman Miller Trade Name: Prototype for Soft Pad Sofa
- Date Issued:
- 1984-01-01T00:00:00Z
- Data Provider:
- Wayne State University. Libraries and Oakland Museum
- Collection:
- Herman Miller Consortium Collection
- Description:
- This Utility Cart, in the collection of The Henry Ford, consists of a chrome plated frame with three shelves and top painted black. The piece has two drawers which are both painted black at the top with chrome drawer pulls and sits on four black casters. It is also referred to as the Haller Mobile Cart. A cart matching this description cannot be found in any Herman Miller Trade Catalog. This confirms that it may be a prototype.
- Date Issued:
- 1975-01-01T00:00:00Z
- Data Provider:
- Wayne State University. Libraries and Henry Ford (Organization)
- Collection:
- Herman Miller Consortium Collection
- Description:
- This Table, in the collection of The Henry Ford, consists of a rectangular top with light tone veneer over molded plywood. The top sits on a base made of four curved, tapered legs of the same material. A table matching these dimensions and description cannot be found in any Herman Miller Trade Catalogues. This confirms that it is probably a prototype.
- Date Issued:
- 1948-01-01T00:00:00Z
- Data Provider:
- Wayne State University. Libraries and Henry Ford (Organization)
- Collection:
- Herman Miller Consortium Collection
- Description:
- Chadwick's Modular Seating is made of Urethane foam cushioning molded over plywood, steel, and molded polystyrene structure. The base is molded, black polystyrene. The molded polystyrene connector is then riveted to a steel bar. This object, in the collection of the Los Angeles County Museum of Art, was a prototype for the production version which included interchangeable seats that can be formed to a custom design thanks to multiple seating arrangements in lounge seating height. The seating can be linked together in any combination with fastener-less connectors in custom layouts from straight line and serpentine line with practically unlimited lengths to full circle. The removable connectors maintain the multiple module arrangements in their custom form and provide for quick rearrangement into another form. One pair of connectors is required for the joint between each module. Each module is neatly tailored and has fully upholstered front, back, and sides for application as either end or interior seat of an arrangement. Arrangement can be made with straight module with parallel sides; inside and outside wedge modules with 22. 5 degree sides; wedge modules provide quarter circle arrangement; 8 wedge modules provide half circle; 16 wedge modules provide full circle all with seating facing either inside or outside as specified; A single straight module provides a complete chair; 3 straight modules with two pair connectors provides a complete 84 inch wide sofa, convertible in moments to a 56 inch wide sofa and a single chair, or to three single chairs. [Source: 1974 Herman Miller, Inc. Trade Catalog. ] Price history varies with module and fabric from $292. 00 to $395. 00. Herman Miller Trade Name: Straight Module Herman Miller Series: Chadwick Modular Seating Product Number: CM 101
- Date Issued:
- [1974 TO 1994]
- Data Provider:
- Wayne State University. Libraries and Los Angeles County Museum of Art
- Collection:
- Herman Miller Consortium Collection
- Description:
- This Chair Shell, in the collection of the Oakland Museum of California, consists of a molded, dark gray plastic shell. This shell form was developed for LaFonda del Sol Restaurant, New York City and appears to be a prototype. Herman Miller Trade Name: Prototype for 1730-1 Arm Chair Herman Miller Series: 1700 Product Number: 1730-1
- Date Issued:
- [1961 TO 1975]
- Data Provider:
- Wayne State University. Libraries and Oakland Museum
- Collection:
- Herman Miller Consortium Collection